Showing posts with label floor care plan. Show all posts
Showing posts with label floor care plan. Show all posts

Tuesday, September 9, 2014

Cleaning Up the Court: Aftermath of the UCLA Water Main Break

Floor Cleanup


In the summer of 2014—amidst a drought that continues to plague much of the west coast—the area of Los Angeles surrounding UCLA experienced a confounding type of flood. It came in the form of a burst water main nearly 30 inches in diameter, which tore a hole in the street roughly 15 feet across and drenched the area with about eight million gallons of water.

What’s even more confounding is the fact that city officials have reportedly stated that this will happen again as century-old infrastructure gives way to the abuses of time and corrosion.

Fortunately, when the water main was successfully shut off after about three and a half hours, cleanup crews took to the scene with a variety of advanced equipment to help minimize the damage.

One specific building to receive attention was Pauley Pavilion, a recently renovated—to the tune of $136 million—athletics facility that was set up for volleyball at the time. That’s where Advance® autoscrubbers entered the scene.

Cleanup crews leveraged their Advance mid-size rider scrubbers by running them with empty tanks and using the squeegee and vacuum systems to pick up several inches of standing water and transport it to appropriate drainage areas. While this function is less common than their typical day-to-day use, Advance autoscrubbers feature the high-performance vacuum power, large capacity pickup tanks and long-life cordless operation that made them a great resource in minimizing some of the damage that occurred during this unfortunate situation.

For more on this story, read The Washington Post article here.

Wednesday, May 29, 2013

Floor Care Basics: How to Clean to Protect Your Bottom Line

This article was originally published in Cleaning & Maintenance Management.

When it comes to floor care, it’s important to make a good first impression. Shiny floors are literally a reflection of your business. In fact, it has been shown that facility appearance ratings can drop by as much as 75% if floor shine makes a bad first impression.

The truth is it’s less expensive to maintain a finish than to repair or replace a floor. So, why not heed those words and create a floor care program that shines favorably on your business and protects your bottom line?

The key to achieving clean, attractive looking floors is regular maintenance and choosing the right cleaning products. The following best practices can help keep finished floors looking great year round.
  1. Prevention: A floor matting program reduces the amount of soil, dirt and moisture that enters the building. Mats should be located inside and outside the building in high-traffic areas, such as the main entrance to the building and the entryway or foyer. Also, place mats throughout the building – near the steps, the elevator shaft or other strategic areas – to continue to capture incoming dirt. Typically, the more mats you have, the longer the life of the floor will be. 
  2. Daily Routine/Maintenance: This should include dust mopping, damp mopping, auto scrubbing, low-speed buffing and high-speed burnishing.
  3. Interim Maintenance: This step involves a deep scrub and recoat. First, remove surface damage, then apply floor finish for a fresh new look. This provides shine restoration when buffing/burnishing is not enough.
  4. Restorative Care: Why strip and refinish? When the floor has darkened or yellowed and when a scrub and recoat will not give a new appearance, restorative care is the next step, which involves stripping, sealing and refinishing. Be sure to use a high quality stripper and choose the right finish for your floors.
Click here to read the full article.